Oil Filter Drain Tool for Toyota, Lexus, Scion 2.0L - 5.7L Engines

MX2341B1

81 reviews

$ 27.95

( / )
Unavailable

Please select all options.

  • Cleaner Oil Changes - This tool fits Toyota 2.0L to 5.7L engines that use the cartridge style oil filter system. It makes the oil change process much cleaner by draining the filter housing prior to removal preventing oil spills.
  • Avoid The Mess - Simply screw the tool into the drain valve on the oil filter housing, then tighten the knurled nut to drain the housing. Once the housing is drained it can be removed to replace the filter without the usual mess.
  • High Quality Construction - This drain tool will provide years of service thanks to it's heavy duty construction. The 3 piece all metal body connects to a 30” long silicone drain hose that allows you to direct the oil into your oil disposal container.
How It Works

Step 1: Remove the 3/8" drive metal plug from the bottom of the oil filter housing to expose the drain valve. 

Step 2: Make sure the knurled nut is backed off all the way (towards the silicone hose)

Step 3: Thread the oil drain tool into the threaded port that was exposed by removing the plug.

Step 4: Direct the end of the drain hose into your oil drain pan or container.

Step 5: Tighten the knurled portion of the tool which activates the spring loaded valve inside the oil filter housing. 

Step 6: Once the housing is drained remove the tool and reinstall the metal drain valve plug.

Specifications

Model # MX2341B1 | Body Material: 7075 Aluminum | Hose Material: Silicone | Hose Length: 36" | Vehicle Connection: Threaded | Seal: O-ring | Warranty: Limited Lifetime | Made in: USA

Customer Reviews
5.0 Based on 81 Reviews
5 ★
96% 
78
4 ★
4% 
3
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
AM
10/19/2024
Anthony M.
United States United States

Great tool, room to improve

Instead of being made to use a wrench…this tool would be perfect if the body and valve were knurled knobs similar to a gimbal ratchet instead of hex shaped. Very well made too but knurled knobs would be perfectly adequate and faster.

J
08/05/2024
Joel SVG verified by SHOP
United States United States
DG
06/18/2024
Daniel G.
United States United States

excellent service, high quality tool!

Have not used it yet, but the machining and finish tell the story, looking forward to that first oil change!

D
05/14/2024
Dean
United States United States

Perfect! (This time)

I have never dreaded an oil change like I did on my 2016 Tundra. Huge mess with the cheap plastic device supplied by Wix. So, I bought the old model Motivx drain device. Just as bad and out ~$25. I was surprised and figured I just wasn’t strong enough to force it in. So that didn’t work although the accompanying filter wrench is an absolute beauty. Very well made and finished. ………… So, looking for solutions, I found Motivx had a new design. Just got this new screw-on drain tool and the problem is solved! Not one drop out of the bucket. Mine had no instructions with it, so I had to fiddle a bit to figure out that you need to unscrew the two hexes as far as they will go, finger loose. Then, screw it into the hole and let the second hex fully engage. You need a wrench for this step. Tip: It drains slowly, so do something else for about 10 minutes. Tip: Depending on your situation, you may benefit from shortening the tube. I no longer dread oil changing with these new Toyota filters. 5*

AC
04/19/2024
aj C.
United States United States