The Motivx Tools 3/8" Drive Metric Master Set was designed to professional standards and includes a full 26 piece array of the most common 3/8" drive tools you'll need to get the job done right the first time.

Tools Include:

Advanced Dual Pawl Ratchet

19 "Advanced Grip" metric sockets (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)

10 Inch "Advanced Grip" Faceted Extension

6 Inch "Advanced Grip" Faceted Extension

3 Inch "Advanced Grip" Faceted Extension

Spring-Loaded Universal Joint

3/8" Drive Adapter

1/2" Drive Adapter

The Motivx Tools advanced 72-tooth ratchet features dual pawls, producing a minimal 2.5° swing angle (most 72-tooth ratchets have a 5° swing angle) for working in close quarters. Handle design incorporates a push button for quick release and securely locks sockets in place while in use.

Sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm

Advanced Grip technology utilizes raised ridges along the outer surface of the sockets to provide greater grip, prevent sockets from rolling, and aiding in quick identification of drive sizes.

Sizes: 10" long extension, 6" medium extension and 3" short extension

The extensions feature the same finger ridges as the sockets which can prevent rolling, provide greater grip and aid in quick identification of the drive sizes. The extensions also feature a faceted shaft which allows the use of an additional tool such as a wrench if more torque is required.

The universal joint's key feature is the spring loaded design which prevents the U-joint from “flopping” to one side or the other. This allows one-handed operation and enables you to reach very tight areas without holding up the joint with your free hand. The universal joint also features the raised ridges along the outer surface providing greater grip, preventing rolling, and aid in the quick identification of drive sizes.

The raised ridges prevents the "Advanced Grip" 3/8" to 1/4" adapter from rolling around. This reduces the time-consuming frustration of retrieving dropped or lost tools. Use the 1/4" adapter to use your 3/8" ratchet with 1/4" drive sockets.

Patented Multi-Functional "Advanced Grip"

Raised ridges along the outer surface of all tools except the ratchet and t-handle provide greater grip, prevents sockets from rolling around - which in turn reduces the time-consuming frustration of retrieving dropped or lost tools.

Drive sizes can easily be identified by the pattern of the raised ridges, 2 Ridges = 1/4" Drive, 3 Ridges = 3/8" Drive, 4 Ridges = 1/2" Drive

The raised ridges made by one-piece forging are much more robust than by conventional knurl manufacturing method.

Faceted Design

The extensions feature a faceted shaft which allows the use of an additional tool such as a wrench if more torque is required.

The sliding T-handles faceted design also prevents the drive end from rotating around the handle.

Advanced Dual Pawl Technology

The Advanced Dual Pawl Ratchet provides a minimal 2.5° swing angle for working in tighter spaces than a standard 5° ratchet.

Spring Loaded U-Joint

Spring-loaded design prevents U-joint from “flopping” to one side or the other, allowing one-handed operation.

This 3/8" Drive Master Set comes with a Limited Lifetime Warranty. For more details, click here.

Our products are manufactured to high standards using quality materials, but on rare occasions things do go wrong. For any warranty related issues please contact us at support@motivxtools.com or go here to fill out our warranty form.

Every 3/8" set is fully inspected in our Puyallup, WA headquarters before being shipped. Not only that, but each foam insert is machined by a team member on site, to ensure maximum consistency and a custom fit.