FREE SHIPPING ON ALL USA ORDERS. NO MINIMUM PURCHASE.

18 Piece Universal Brake Wind Back Set

MX2502

18 PIECE UNIVERSAL BRAKE WIND BACK SET

Part Number: MX2320

  • Universal Set - Compresses disk brake pistons requiring right or left hand rotation or traditional push back style pistons on vehicles such as Audi, BMW, Ford, GM, Honda, Land Rover, Mazda, Mitsubishi, Nissan, Subaru, Toyota, and VW vehicles. Not for use on electronic calipers.

  • Quality Product - Motivx Tools is a family owned and operated specialty tool company and we take great pride in our products. Our tools are backed by a 1 year warranty and excellent customer service.

  • Built To Last - Our brake wind back sets are made from quality steel and stand up to continued use. The piston adapters are thicker than many on the market with cleanly punched holes and squarely pressed pins.

  • Excellent Fit & Finish - All 18 steel components are black oxide coated to prevent rust, laser engraved with the Motivx Tools logo, and come fitted in a plastic case for easy storage.

  • Purchase With Confidence - Buy our Motivx Tools brake wind back set knowing it's good quality, built to last, and most importantly we stand behind our products.

Questions & Answers

Q: What is this kit for?

A:  Rear parking brakes were for the most part always activated by a cable that engaged the rear brake shoes against the rear brake drums.  In the last 20 years give or take, rear brake shoes have been phased out and replaced with the more modern hydraulic disk brake system.  Unlike front brake calipers which are purely hydraulically activated, the rear calipers also need a way to be mechanically activated to function as a parking brake.  Like a typical disk brake caliper, as the brake pads wear the piston becomes extended and must be retracted to install new pads.   Because of the mechanical action, the rear brake pistons on most modern vehicles must be screwed back into the caliper.  This is not required on front calipers because they are strictly hydraulic, so the pistons can be pressed straight back into the caliper.  The Motivx Tools brake wind back set properly retracts the pistons by rotating them while applying pressure.    

Q: How do I know if I need this kit?

A:  If you have a vehicle with rear disk brakes, you will probably need either this 18pc set or our 12pc set to service the brake system.  The best way to tell (without starting the job and having to stop) is to look in a service manual or online forum for your particular vehicle.  Another good resource is searching YouTube for your vehicle and adding the words "rear brakes".  There are many tutorial videos that will show you how the rear brake job is done on your vehicle and you'll know if you need to wind the pistons back or not. 

Q: What's the difference between this 18 piece set and the MX2501 12 piece set?

A: The biggest difference is that it contains two thrust bolts instead of one, and the second thrust bolt is left hand thread.  The thrust bolt is the long screw or bolt looking piece that drives the adapter.  There are some (very few) vehicles that will require one of the rear caliper pistons to be rotated back in the right hand direction and other one that will require the left hand direction.  This 18 piece set also contains more adapters for less common vehicles.  If you're not sure which set you need, I would highly recommend picking up this 18 piece set over the 12 piece set.  The cost isn't much more and you'll have the additional pieces in case you need them.     

Q: I've never used a set like this before, are there instructions?

A: Yes!  We've included detailed instructions with photos on exactly how the set is supposed to be used. 



Related Items